Ethernet Interface

• 10/100/1000BaseT(X) Ports (RJ45 connector)

  • 8
    Auto MDI/MDI-X connection
    Auto negotiation speed
    Full/Half duplex mode

• 100/1000/2500BaseSFP Ports

  • 4

• 1000/2500BaseSFP Ports

  • 2

• Standards

  • IEEE 802.3 for 10BaseT
    IEEE 802.3u for 100BaseT(X)
    IEEE 802.3ab for 1000BaseT(X)
    IEEE 802.3z for 1000BaseX
    IEEE 802.3bz for 2.5GBaseX
    IEEE 802.3x for flow control
    IEEE 802.3ad for Port Trunk with LACP
    IEEE 802.1Q for VLAN Tagging
    IEEE 802.1D-2004 for Spanning Tree Protocol
    IEEE 802.1w for Rapid Spanning Tree Protocol
    IEEE 802.1p for Class of Service
    IEEE 802.1X for authentication

Ethernet Software Features

• Industrial Protocols

  • EtherNet/IP
    Modbus TCP
    PROFINET IO Device

• Management

  • IPv4/IPv6
    Flow control
    Back Pressure Flow Control
    DHCP Server/Client
    ARP
    RARP
    LLDP
    Port Mirroring (SPAN, RSPAN)
    Linkup Delay
    SMTP
    SNMP Trap
    SNMP Inform
    SNMPv1/v2c/v3
    RMON
    TFTP
    SFTP
    HTTP
    HTTPS
    Telnet
    Syslog
    Private MIB
    Fiber check

• Filter

  • GMRP
    GVRP
    GARP
    802.1Q VLAN
    IGMP Snooping v1/v2/v3
    IGMP Querier

• Redundancy Protocols

  • STP
    RSTP
    Turbo Ring v2
    Turbo Chain
    Ring Coupling
    Dual-Homing
    Link Aggregation
    MRP
    MSTP

• Security

  • Broadcast storm protection
    Rate Limit
    Trust access control
    Static Port Lock
    MAC Sticky
    HTTPS/SSL
    SSH
    RADIUS
    TACACS+
    Login and Password Policy
    Access control list
    DHCP Snooping

• Time Management

  • SNTP
    NTP Server/Client
    NTP Authentication
    IEEE 1588v2 PTP (hardware-based)
    Supported power profiles: IEEE 1588 Default 2008, IEC 61850-9-3-2016, IEEE C37.238-2017

• Protocols

  • IPv4/IPv6
    TCP/IP
    UDP
    ICMP
    ARP
    RARP
    TFTP
    DNS
    NTP Client
    DHCP Server
    DHCP Client
    802.1X
    QoS
    HTTPS
    HTTP
    Telnet
    SMTP
    SNMPv1/v2c/v3
    RMON
    Syslog

• MIB

  • P-BRIDGE MIB
    Q-BRIDGE MIB
    IEEE8021-SPANNING-TREE-MIB
    IEEE8021-PAE-MIB
    IEEE8023-LAG-MIB
    LLDP-EXT-DOT1-MIB
    LLDP-EXT-DOT3-MIB
    SNMPv2-MIB
    RMON MIB Groups 1, 2, 3, 9

Switch Properties

• MAC Table Size

  • 16 K

• Jumbo Frame Size

  • 9.216 KB

• Max. No. of VLANs

  • 256

• VLAN ID Range

  • VID 1 to 4094

• IGMP Groups

  • 512

• Priority Queues

  • 4

• Packet Buffer Size

  • 1 MB

LED Interface

• LED Indicators

  • PWR1, PWR2, STATE, FAULT, MSTR/HEAD, CPLR/TAIL, SYNC

Serial Interface

• Console Port

  • RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)

USB Interface

• USB Connector

  • USB Type A (Reserved)

Input/Output Interface

• Alarm Contact Channels

  • 1, Relay output with current carrying capacity of 1 A @ 24 VDC

• Digital Input Channels

  • 1

• Digital Inputs

  • +13 to +30 V for state 1
    -30 to +3 V for state 0
    Max. input current: 8 mA

• Buttons

  • Reset button

DIP Switch Configuration

• DIP Switches

  • Turbo Ring, Master, Coupler, Reserve

Power Parameters

• Connection

  • 2 removable 4-contact terminal block(s)

• Pre-installed Power Module

  • PWR-105-HV-I

• Note

  • The EDS-G4014 Series supports modular power supplies. The model names and power parameters are determined by the installed power module.
    
    For example:
    EDS-G4014-6QGS-T + PWR-100-LV = EDS-G4014-6QGS-LV-T
    EDS-G4014-6QGS-T + PWR-105-HV-I = EDS-G4014-6QGS-HV-T
    
    If you install a different power module, refer to the specifications of the corresponding model. For example, if you replace the power module of the EDS-G4014-6QGS-LV-T with the PWR-105-HV-I, refer to the specifications of the EDS-G4014-6QGS-HV-T.

• Input Voltage

  • 110/220 VDC/VAC
    Single input

• Operating Voltage

  • 88 to 300 VDC, 85 to 264 VAC

• Input Current

  • 110-220 VAC, 50-60 Hz, 0.30-0.20 A or 110-220 VDC, 0.30-0.20 A

• Power Consumption (Max.)

  • 17.32 W

• Overload Current Protection

  • Supported

• Reverse Polarity Protection

  • Supported

Physical Characteristics

• IP Rating

  • IP40

• Dimensions

  • 55 x 140 x 122.5 mm (2.17 x 5.51 x 4.82 in)

• Weight

  • 846 g (1.87 lb)

• Installation

  • DIN-rail mounting
    Wall mounting (with optional kit)

• Housing

  • Metal

Environmental Limits

• Operating Temperature

  • -10 to 60°C (14 to 140°F)

• Ambient Relative Humidity

  • 5 to 95% (non-condensing)

Standards and Certifications

• Industrial Cybersecurity

  • IEC 62443-4-1
    IEC 62443-4-2

• Safety

  • UL 61010-2-201
    EN 62368-1 (LVD)

• EMC

  • EN 55032/35
    EN 61000-6-2/-6-4

• EMI

  • CISPR 32, FCC Part 15B Class A

• EMS

  • IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
    IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
    IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
    IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
    IEC 61000-4-6 CS: 10 V
    IEC 61000-4-8 PFMF

• Vibration

  • IEC 60068-2-6

• Shock

  • IEC 60068-2-27

• Freefall

  • IEC 60068-2-32

• Railway

  • EN 50121-4

• Traffic Control

  • NEMA TS2

• Power Substation

  • IEC 61850-3
    IEEE 1613 Class 1

MTBF

• Time

  • 487,613 hrs

Warranty

• Warranty Period

  • 5 years

• Details

  • See www.moxa.com/warranty