Ethernet Interface

• 10/100BaseT(X) Ports (RJ45 connector)

  • 6
    Auto negotiation speed
    Full/Half duplex mode
    Auto MDI/MDI-X connection

• 100BaseFX Ports (single-mode SC connector)

  • 3

• Standards

  • IEEE 802.3 for 10BaseT
    IEEE 802.3u for 100BaseT(X) and 100BaseFX
    IEEE 802.3x for flow control
    IEEE 802.3ad for Port Trunk with LACP
    IEEE 802.1Q for VLAN Tagging
    IEEE 802.1D-2004 for Spanning Tree Protocol
    IEEE 802.1w for Rapid Spanning Tree Protocol
    IEEE 802.1p for Class of Service
    IEEE 802.1X for authentication

• Optical Fiber

  • Read more

    		100BaseFX
    		Multi-Mode		Single-Mode
    Fiber Cable Type		OM1	50/125 µm	G.652
    			800 MHz x km
    Typical Distance		4 km	5 km	40 km
    Wavelength	Typical (nm)	1300		1310
    	TX Range (nm)	1260 to 1360		1280 to 1340
    	RX Range (nm)	1100 to 1600		1100 to 1600
    Optical Power	TX Range (dBm)	-10 to -20		0 to -5
    	RX Range (dBm)	-3 to -32		-3 to -34
    	Link Budget (dB)	12		29
    	Dispersion Penalty (dB)	3		1
    Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power. Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB).

Ethernet Software Features

• Industrial Protocols

  • EtherNet/IP
    Modbus TCP
    PROFINET IO Device

• Management

  • IPv4/IPv6
    Flow control
    Back Pressure Flow Control
    DHCP Server/Client
    ARP
    RARP
    LLDP
    Fiber check
    Port Mirroring (SPAN, RSPAN)
    Linkup Delay
    SMTP
    SNMP Trap
    SNMP Inform
    SNMPv1/v2c/v3
    RMON
    TFTP
    SFTP
    HTTP
    HTTPS
    Telnet
    Syslog
    Private MIB

• Filter

  • GMRP
    GVRP
    GARP
    802.1Q VLAN
    IGMP Snooping v1/v2/v3
    IGMP Querier

• Redundancy Protocols

  • STP
    RSTP
    Turbo Ring v2
    Turbo Chain
    Ring Coupling
    Dual-Homing
    Link Aggregation
    MRP
    MSTP

• Security

  • Broadcast storm protection
    Rate Limit
    Trust access control
    Static Port Lock
    MAC Sticky
    HTTPS/SSL
    SSH
    RADIUS
    TACACS+
    Access control list
    Login and Password Policy
    DHCP Snooping

• Time Management

  • SNTP
    NTP Server/Client
    NTP Authentication
    IEEE 1588v2 PTP (hardware-based)
    Supported power profiles: IEEE 1588 Default 2008, IEC 61850-9-3-2016, IEEE C37.238-2017

• Protocols

  • IPv4/IPv6
    TCP/IP
    UDP
    ICMP
    ARP
    RARP
    TFTP
    DNS
    NTP Client
    DHCP Server
    DHCP Client
    802.1X
    QoS
    HTTPS
    HTTP
    Telnet
    SMTP
    SNMPv1/v2c/v3
    RMON
    Syslog

• MIB

  • P-BRIDGE MIB
    Q-BRIDGE MIB
    IEEE8021-SPANNING-TREE-MIB
    IEEE8021-PAE-MIB
    IEEE8023-LAG-MIB
    LLDP-EXT-DOT1-MIB
    LLDP-EXT-DOT3-MIB
    SNMPv2-MIB
    RMON MIB Groups 1, 2, 3, 9

Switch Properties

• MAC Table Size

  • 16 K

• Jumbo Frame Size

  • 9.216 KB

• Max. No. of VLANs

  • 256

• VLAN ID Range

  • VID 1 to 4094

• IGMP Groups

  • 512

• Priority Queues

  • 4

• Packet Buffer Size

  • 1 MB

LED Interface

• LED Indicators

  • PWR1, PWR2, STATE, FAULT, MSTR/HEAD, CPLR/TAIL, SYNC

Serial Interface

• Console Port

  • RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)

USB Interface

• USB Connector

  • USB Type A (Reserved)

Input/Output Interface

• Alarm Contact Channels

  • 1, Relay output with current carrying capacity of 1 A @ 24 VDC

• Digital Input Channels

  • 1

• Digital Inputs

  • +13 to +30 V for state 1
    -30 to +3 V for state 0
    Max. input current: 8 mA

• Buttons

  • Reset button

DIP Switch Configuration

• DIP Switches

  • Turbo Ring, Master, Coupler, Reserve

Power Parameters

• Connection

  • 2 removable 4-contact terminal block(s)

• Pre-installed Power Module

  • PWR-100–LV

• Note

  • The EDS-4009 Series supports modular power supplies. The model names and power parameters are determined by the installed power module.
    
    For example:
    EDS-4009-T + PWR-100–LV = EDS-4009-LV-T
    EDS-4009-T + PWR-105-HV-I = EDS-4009-HV-T
    
    If you install a different power module, refer to the specifications of the corresponding model. For example, if you replace the power module of the EDS-4009–LV-T
    with the PWR-105–HV-I, refer to the specifications of the EDS-4009–HV-T.

• Input Voltage

  • 12/24/48 VDC
    Redundant dual inputs

• Operating Voltage

  • 9.6 to 60 VDC

• Input Current

  • 12-48 VDC, 1.50-0.40 A or 24 VDC, 0.70 A

• Power Consumption (Max.)

  • 9.51 W

• Overload Current Protection

  • Supported

• Reverse Polarity Protection

  • Supported

Physical Characteristics

• IP Rating

  • IP40

• Dimensions

  • 55 x 140 x 120 mm (2.17 x 5.51 x 4.72 in)

• Weight

  • 932 g (2.05 lb)

• Installation

  • DIN-rail mounting
    Wall mounting (with optional kit)

• Housing

  • Metal

Environmental Limits

• Operating Temperature

  • -10 to 60°C (14 to 140°F)

• Storage Temperature (package included)

  • -40 to 85°C (-40 to 185°F)

• Ambient Relative Humidity

  • 5 to 95% (non-condensing)

Standards and Certifications

• Industrial Cybersecurity

  • IEC 62443-4-1
    IEC 62443-4-2

• Safety

  • UL 61010-2-201
    EN 62368-1 (LVD)

• EMC

  • EN 55032/35
    EN 61000-6-2/-6-4

• EMI

  • CISPR 32, FCC Part 15B Class A

• EMS

  • IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
    IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
    IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
    IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
    IEC 61000-4-6 CS: 10 V
    IEC 61000-4-8 PFMF

• Maritime

  • NK
    LR
    DNV
    ABS

• Vibration

  • IEC 60068-2-6

• Shock

  • IEC 60068-2-27

• Freefall

  • IEC 60068-2-32

• Railway

  • EN 50121-4

• Traffic Control

  • NEMA TS2

• Power Substation

  • IEC 61850-3
    IEEE 1613 Class 1

• Hazardous Locations

  • ATEX
    IECEx
    Class I Division 2

MTBF

• Time

  • 972,841 hrs

Warranty

• Warranty Period

  • 5 years

• Details

  • www.moxa.com/warranty