Input/Output Interface

• Alarm Contact Channels

  • 2
    Relay output with current carrying capacity of 1 A @ 24 VDC

• Digital Input Channels

  • 2

• Digital Inputs

  • +13 to +30 V for state 1
    -30 to +3 V for state 0
    Max. input current: 8 mA

Ethernet Interface

• 10/100BaseT(X) Ports (RJ45 connector)

  • 6
    Auto negotiation speed
    Full/Half duplex mode
    Auto MDI/MDI-X connection

• 100BaseFX Ports (multi-mode ST connector)

  • 2

• Standards

  • IEEE 802.3 for 10BaseT
    IEEE 802.3u for 100BaseT(X) and 100BaseFX
    IEEE 802.1X for authentication
    IEEE 802.1D-2004 for Spanning Tree Protocol
    IEEE 802.1w for Rapid Spanning Tree Protocol
    IEEE 802.1s for Multiple Spanning Tree Protocol
    IEEE 802.1Q for VLAN Tagging
    IEEE 802.1p for Class of Service
    IEEE 802.3x for flow control
    IEEE 802.3ad for Port Trunk with LACP

• Optical Fiber

  • Read more

    		100BaseFX
    		Multi-Mode		Single-Mode (40 km)	Single-Mode (80 km)
    Fiber Cable Type		OM1	50/125 µm	G.652	G.652
    			800 MHz x km
    Typical Distance		4 km	5 km	40 km	80 km
    Wavelength	Typical (nm)	1300		1310	1550
    	TX Range (nm)	1260 to 1360		1280 to 1340	1530 to 1570
    	RX Range (nm)	1100 to 1600		1100 to 1600	1100 to 1600
    Optical Power	TX Range (dBm)	-10 to -20		0 to -5	0 to -5
    	RX Range (dBm)	-3 to -32		-3 to -34	-3 to -34
    	Link Budget (dB)	12		29	29
    	Dispersion Penalty (dB)	3		1	1
    Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power. Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB).

Ethernet Software Features

• Filter

  • 802.1Q VLAN
    Port-based VLAN
    IGMP v1/v2
    GVRP
    GMRP

• Industrial Protocols

  • EtherNet/IP
    Modbus TCP

• Management

  • IPv4/IPv6
    SNMPv1/v2c/v3
    LLDP
    Port Mirror
    Back Pressure Flow Control
    BOOTP
    DDM
    DHCP Option 66/67/82
    DHCP Server/Client
    Flow control
    RARP
    RMON
    SMTP
    SNMP Inform
    Syslog
    Telnet
    TFTP

• MIB

  • MIB-II
    Bridge MIB
    Ethernet-like MIB
    P-BRIDGE MIB
    Q-BRIDGE MIB
    RMON MIB Groups 1, 2, 3, 9
    RSTP MIB

• Redundancy Protocols

  • STP
    MSTP
    RSTP
    LACP
    Link Aggregation
    Turbo Chain
    Turbo Ring v1/v2

• Security

  • HTTPS/SSL
    TACACS+
    Port Lock
    RADIUS
    SSH

• Time Management

  • NTP Server/Client
    SNTP
    IEEE 1588v2 PTP (software-based)

Switch Properties

• IGMP Groups

  • 256

• MAC Table Size

  • 8 K

• Max. No. of VLANs

  • 64

• Packet Buffer Size

  • 1 Mbits

• Priority Queues

  • 4

• VLAN ID Range

  • VID 1 to 4094

LED Interface

• LED Indicators

  • PWR1, PWR2, FAULT, 10/100M (TP port), 100M (fiber port), MSTR/HEAD, CPLR/TAIL

Serial Interface

• Console Port

  • RS-232 (TxD, RxD, GND), 10-pin RJ45 (115200, n, 8, 1)

DIP Switch Configuration

• Ethernet Interface

  • Turbo Ring, Master, Coupler, Reserve

Power Parameters

• Connection

  • 2 removable 6-contact terminal block(s)

• Input Voltage

  • 12/24/48 VDC
    Redundant dual inputs

• Operating Voltage

  • 9.6 to 60 VDC

• Input Current

  • 0.30 A @ 24 VDC

• Overload Current Protection

  • Supported

• Reverse Polarity Protection

  • Supported

Physical Characteristics

• Housing

  • Metal

• IP Rating

  • IP30

• Dimensions

  • 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in)

• Weight

  • 1040 g (2.3 lb)

• Installation

  • DIN-rail mounting
    Wall mounting (with optional kit)

Environmental Limits

• Operating Temperature

  • -10 to 60°C (14 to 140°F)

• Storage Temperature (package included)

  • -40 to 85°C (-40 to 185°F)

• Ambient Relative Humidity

  • 5 to 95% (non-condensing)

Standards and Certifications

• Safety

  • EN 62368-1
    UL 60950-1
    UL 508

• EMC

  • EN 55032/35

• EMI

  • CISPR 32, FCC Part 15B Class A

• EMS

  • IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
    IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
    IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
    IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
    IEC 61000-4-6 CS: 10 V
    IEC 61000-4-8 PFMF

• Hazardous Locations

  • ATEX
    Class I Division 2

• Vibration

  • IEC 60068-2-6

• Shock

  • IEC 60068-2-27

• Freefall

  • IEC 60068-2-31

• Maritime

  • DNV

MTBF

• Time

  • 1,043,909 hrs

• Standards

  • Telcordia (Bellcore), GB

Warranty

• Warranty Period

  • 5 years

• Details

  • See www.moxa.com/warranty