WLAN Interface

• WLAN Standards

  • 802.11a/b/g/n
    802.11i Wireless Security

• Modulation Type

  • DSSS
    OFDM
    MIMO-OFDM

• Frequency Band for US (20 MHz operating channels)

  • 2.412 to 2.462 GHz (11 channels)
    5.180 to 5.240 GHz (4 channels)
    5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
    5.500 to 5.700 GHz (8 channels) excluding 5.600 to 5.640 GHz DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
    5.745 to 5.825 GHz (5 channels)

• Wireless Security

  • WEP encryption (64-bit and 128-bit)
    WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)
    WPA/WPA2-Personal

• Transmission Rate

  • 802.11b: 1 to 11 Mbps
    802.11a/g: 6 to 54 Mbps
    802.11n: 6.5 to 300 Mbps

• Transmitter Power for 802.11a

  • 23±1.5 dBm @ 6 to 24 Mbps
    21±1.5 dBm @ 36 Mbps
    20±1.5 dBm @ 48 Mbps
    18±1.5 dBm @ 54 Mbps

• Transmitter Power for 802.11n (5 GHz)

  • 23±1.5 dBm @ MCS0/8 20 MHz
    18±1.5 dBm @ MCS7/15 20 MHz
    23±1.5 dBm @ MCS0/8 40 MHz
    17±1.5 dBm @ MCS7/15 40 MHz

• Transmitter Power for 802.11b

  • 26±1.5 dBm @ 1 Mbps
    26±1.5 dBm @ 2 Mbps
    26±1.5 dBm @ 5.5 Mbps
    25±1.5 dBm @ 11 Mbps

• Transmitter Power for 802.11g

  • 23±1.5 dBm @ 6 to 24 Mbps
    21±1.5 dBm @ 36 Mbps
    19±1.5 dBm @ 48 Mbps
    18±1.5 dBm @ 54 Mbps

• Transmitter Power for 802.11n (2.4 GHz)

  • 23±1.5 dBm @ MCS0/8 20 MHz
    18±1.5 dBm @ MCS7/15 20 MHz
    23±1.5 dBm @ MCS0/8 40 MHz
    17±1.5 dBm @ MCS7/15 40 MHz

• Transmitter Power

  • Read more

    	US	EU	JP
    2.4 GHz	26 dBm	18 dBm	18 dBm
    5 GHz (UNII-1)	23 dBm	21 dBm	21 dBm
    5 GHz (UNII-2)	23 dBm	21 dBm	21 dBm
    5 GHz (UNII-2e)	23 dBm	23 dBm	23 dBm
    5 GHz (UNII-3)	23 dBm	–	–
    Note: Based on regional regulations, the maximum transmission power allowed on the UNII bands is restricted in the firmware, as indicated above.

• Receiver Sensitivity for 802.11a (measured at 5.680 GHz)

  • Typ. -90 @ 6 Mbps
    Typ. -88 @ 9 Mbps
    Typ. -88 @ 12 Mbps
    Typ. -85 @ 18 Mbps
    Typ. -81 @ 24 Mbps
    Typ. -78 @ 36 Mbps
    Typ. -74 @ 48 Mbps
    Typ. -72 @ 54 Mbps
    Note: Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications.

• Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz)

  • Typ. -69 dBm @ MCS7 20 MHz
    Typ. -71 dBm @ MCS15 20 MHz
    Typ. -63 dBm @ MCS7 40 MHz
    Typ. -68 dBm @ MCS15 40 MHz
    Note: Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications.

• Receiver Sensitivity for 802.11b (measured at 2.437 GHz)

  • Typ. -93 dBm @ 1 Mbps
    Typ. -93 dBm @ 2 Mbps
    Typ. -93 dBm @ 5.5 Mbps
    Typ. -88 dBm @ 11 Mbps

• Receiver Sensitivity for 802.11g (measured at 2.437 GHz)

  • Typ. -88 dBm @ 6 Mbps
    Typ. -86 dBm @ 9 Mbps
    Typ. -85 dBm @ 12 Mbps
    Typ. -85 dBm @ 18 Mbps
    Typ. -85 dBm @ 24 Mbps
    Typ. -82 dBm @ 36 Mbps
    Typ. -78 dBm @ 48 Mbps
    Typ. -74 dBm @ 54 Mbps

• Receiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz)

  • Typ. -70 dBm @ MCS7 20 MHz
    Typ. -69 dBm @ MCS15 20 MHz
    Typ. -67 dBm @ MCS7 40 MHz
    Typ. -67 dBm @ MCS15 40 MHz

• WLAN Operation Mode

  • Access point, Client, Client-Router, Master, Slave, Sniffer

• Antenna

  • External, 2/2 dBi, Omni-directional

• Antenna Connectors

  • 2 RP-SMA female

Ethernet Interface

• Standards

  • IEEE 802.3 for 10BaseT
    IEEE 802.3u for 100BaseT(X)
    IEEE 802.3ab for 1000BaseT(X)
    IEEE 802.3at for PoE
    IEEE 802.1Q for VLAN Tagging
    IEEE 802.1X for authentication
    IEEE 802.1D-2004 for Spanning Tree Protocol
    IEEE 802.1w for Rapid Spanning Tree Protocol

• PoE Ports (10/100/1000BaseT(X), RJ45 connector)

  • 1

Ethernet Software Features

• Management

  • DHCP Server/Client, DNS, HTTP, IPv4, LLDP, Proxy ARP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, VLAN, Wireless Search Utility, MXview, MXview Wireless, MXconfig

• Routing

  • Port forwarding, Static Route, NAT

• Redundancy Protocols

  • RSTP, STP

• Security

  • HTTPS/SSL, RADIUS, SSH

• Time Management

  • SNTP Client

Firewall

• Filter

  • ICMP, MAC address, IP protocol, Port-based

Serial Interface

• Console Port

  • RS-232, 8-pin RJ45

LED Interface

• LED Indicators

  • PWR1, PWR2, PoE, FAULT, STATE, SIGNAL, WLAN, LAN

Input/Output Interface

• Digital Inputs

  • 2
    Max. input current: 8 mA
    +13 to +30 V for state 1
    +3 to -30 V for state 0

• Alarm Contact Channels

  • Relay output with current carrying capacity of 1 A @ 24 VDC

• Buttons

  • Reset button

Physical Characteristics

• Housing

  • Metal

• IP Rating

  • IP30

• Dimensions

  • 52.7 x 135 x 105 mm (2.08 x 5.32 x 4.13 in)

• Weight

  • 860 g (1.9 lb)

• Installation

  • DIN-rail mounting, Wall mounting (with optional kit)

Power Parameters

• Input Current

  • 0.6 A @ 12 VDC, 0.15 A @ 48 VDC

• Input Voltage

  • 12 to 48 VDC, Redundant dual inputs, 48 VDC Power-over-Ethernet

• Power Connector

  • 1 removable 10-contact terminal block(s)

• Power Consumption

  • 7.2 W (max.)

• Reverse Polarity Protection

  • Supported

Environmental Limits

• Operating Temperature

  • -25 to 60°C (-13 to 140°F)

• Storage Temperature (package included)

  • -40 to 85°C (-40 to 185°F)

• Ambient Relative Humidity

  • 5 to 95% (non-condensing)

Standards and Certifications

• EMC

  • EN 61000-6-2/-6-4

• EMI

  • CISPR 32, FCC Part 15B Class A

• EMS

  • IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
    IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
    IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
    IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
    IEC 61000-4-6 CS: 3 V
    IEC 61000-4-8 PFMF

• Hazardous Locations

  • ATEX, Class I Division 2, IECEx

• Radio

  • EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-WAPN008, ANATEL, MIC, NCC, RCM, SRRC, WPC, KC

• Safety

  • EN 60950-1, UL 60950-1

• Vibration

  • IEC 60068-2-6

MTBF

• Time

  • 570,854 hrs

• Standards

  • Telcordia SR332

Warranty

• Warranty Period

  • 5 years

• Details

  • See www.moxa.com/warranty